Easy Ways to Clean White Converse

Easy Ways to Clean White Converse: White Converse shoes look great when they’re brand new, but they may develop a less appealing shade after a significant amount of use.

Thankfully, there are a variety of methods you can use to get them nice and clean again! Nothing spoils a crisp summer outfit more than wearing white Converse sneakers covered with stains, smudges, and scuffs. It doesn’t matter how chic you look (or how great of a steal your maxi dress is!): you probably can’t stop thinking that everyone is looking at your dingy shoes.

Easy Ways to Clean White Converse
Easy Ways to Clean White Converse

How To Clean Your White Converse

White converse shoes are a shoe closet staple; they are versatile, comfortable and stylish. Throw in just a pair of converse shoes with just about anything, and there’s no going wrong there. But, wait, there’s a glitch though. Yes, they get awfully dirty and within the first couple of uses, or even worse if you happened to use them in rains. It’s sixty to zero in no time, and you just don’t know how to deal with, neither can we part ways.

You don’t have to because here are six hacks that are going to change it all for you. These are quick, easy and highly effective ways of cleaning your white converse shoes. So, if you have not been using your shoes, time to bring them out, baby.

Cleaning Your White Converse Shoes – Snapshot

  1. Remove the lace off the shoes.
  2. Run them under cold water and ensure that they are wet.
  3. Use one of the following ways to make cleaning agent, and rub it all over with a brush.
  4. Thoroughly rub the paste all over the shoes – tongue, sole and edges.
  5. Either rinse them with cold water or toss them in the washing machine.
  6. Hang them dry and avoid putting them in the dryer.

How To Clean White Converse With Baking Soda

  1. Scrub the paste over the shoes. Dip a clean toothbrush or nail brush into the homemade cleanser. Scrub the surface of the shoes all over with the same brush, cleaning all sides and focusing on any especially dirty areas.

      • Do not use a metal bowl or spoon. Metal can react negatively to the vinegar.
      • You could also use washing powder instead of baking soda or liquid laundry detergent instead of vinegar, depending on which you have on hand. The mixture may not fizz as much when made, but it will still be effective.
      • The paste should be about two parts baking soda and three parts vinegar. Do not use red wine vinegar, however, as it stains. As a general rule, though, only use enough of each to form a paste-like consistency.

        Rinse again under cool water when done. This is not strictly necessary, but you can check on your progress and avoid getting baking soda or vinegar all into your washing machine.

        Remove the shoelaces. Unlace your shoes to expose as much of the white canvas as possible, making it easier to thoroughly clean your sneakers.

        • You can clean shoelaces separately by letting them soak in a bucket or basin of warm, soapy water, but know that they may never be as bright as they once were. An alternative is to replace your old shoelaces with new ones.

        Converse With Baking Soda

        Converse With Baking Soda

        Rinse the shoes under running water. Drench your Converse shoes in cold water. You can either rinse them under a running faucet or dunk them into a large bucket or basin of water.

        Make a paste with baking soda and vinegar. Combine enough baking soda and white vinegar in a glass or plastic bowl to form a foamy, thin paste.Use cold water instead of warm water to prevent any stains from setting in or any colors from running and ruining more of the white canvas. You can work over the sink for the entire process, or you could spread out a sheet of wax paper or plastic over your counter or floor and work on that. The process can get messy and the cleaning solution can affect your counter or floor, so you want to avoid letting any excess drip off and onto something it could damage.

    Toss your shoes into the washing machine. Place your white Converse shoes in the washing machine along with a little standard detergent. Run the machine on a full cycle using cold water.

    • Do not use a chlorinated bleach or detergent.
    • To help prevent your shoes from banging around too violently inside the washing machine, wrap them in a mesh or fabric laundry bag before throwing them in.
    Let the shoe air dry. Converse shoes must be allowed to air dry. To speed the process up and help further the whitening effect, place your shoes in a warm, sunny, and dry location to dry.
    • The dry warmth of the sun can help dry the shoes faster, and the light of the sun actually has a mild bleaching effect.
    • Do not use a dryer. Machine drying white Converse will result in the shoes losing their shape.

What You Will Need

  1. Vinegar
  2. Baking soda
  3. Brush for scrubbing
  4. Glass bowl
  5. Hot Water
  6. An old toothbrush or applicator brush

How To Use It

  1. Use a glass bowl to add one part baking soda to two parts vinegar.
  2. Add a little warm water.
  3. You can increase the quantity depending on your need.
  4. With an old toothbrush, rub the paste all over the shoes for a few minutes.
  5. Repeat the procedure if needed.
  6. Throw it in a washing machine or rinse it with water.
  7. Hang them dry.

How To Clean My White Converse

Use plain soap and water. Usually, scrubbing scuff marks with a sponge soaked with soapy water will do the trick.

  • Use a mild soap, such as hand soap or liquid dish detergent with no added fragrances or chemicals. Mix a few drops into a cup of warm water and stir until bubbles form on the surface.
  • When scrubbing the scuff mark, rub the shoe with your sponge using firm, circular motions.
Try WD-40. Spray a little WD-40 directly on the scuff marks and buff the marks away with a sponge or rag.
Apply nail polish remover. Soak a cotton ball or cotton pad in a little acetone nail polish remover and scrub the scuff marks with the remover until cleaned.
Dab on a little bleach. Dilute a small amount of bleach with water. Dunk a clean toothbrush into this bleach mixture and use it to scrub out the scuff marks. Keep the petroleum jelly on the rubber portion of the shoe and avoid the canvas part, if possible. The oil in petroleum jelly can sometimes leave a light stain of its own on fabric.
Scrub out scuffs with whitening toothpaste. Apply the toothpaste directly to the scuff mark and scrub at it with a toothbrush.
Use lemon. Cut a lemon in half and directly apply the cut side of one half to the scuff marks on your shoe. Scrub vigorously to remove the mark.
Apply petroleum jelly. Rub petroleum jelly on the scuff mark. Let it sit for five minutes before wiping it away with a damp rag. Petroleum jelly can cling to the dirty particles of scuffed up material and lift away the debris.
Rub the scuffs with rubbing alcohol. Apply the rubbing alcohol to the scuff marks with a cotton ball or cotton pad. Scrub well, and clean any remaining alcohol off with a damp rag when done. Rubbing alcohol is a very strong household substance that can strip away many forms of stubborn debris and grime. Lemon juice is often used as a natural alternative to bleach. Leave the lemon juice on the scuff mark for 15 to 20 minutes before rinsing it off with cool, plain water. If you do not have whole lemons, you could also scrub the spot with a little lemon juice and a toothbrush or rag.
Toothpaste with baking soda in it is preferable to any other. Baking soda has additional benefits as a cleanser, and as a mild abrasive, it can strip away the stain-causing the scuff mark. If you cannot find a baking soda toothpaste, though, another toothpaste with a whitening agent in it can also work. Bleach is a known whitener, but it is also a harsh chemical.
As such, you should only use just as much as you need to avoid damaging your shoes. You should also only use it on the rubber portion of the shoe and not on the canvas partVigorously rub the mark with the nail polish remover to get rid of it. The scuff mark should fade in appearance almost instantly. An acetone-based nail polish remover works best among other things, WD-40 is often used to extract moisture and clean off dirt and residue from a range of surfaces. Only use it on the rubber part of the shoe, however, and not the canvas. As an oil-based product, WD-40 can leave stains on material like canvas.

How To Keep White Converse Clean

White leather Converse is a stylish accessory. But they quickly lose their original gloss, especially if they are actively worn.

White Converse Clean
White Converse Clean

Remember, soaking and washing leather Converse is not recommended. This will lead to color distortion and leather shrinkage. So, use a gentle moderately wet cleaning.

  1. Return the past beauty to your white leather Converses with the help of the following tips: • Remove the laces and the insoles. They should be soaked and thoroughly washed by hand separately.
  2. • Wipe off dust and heavy dirt with a damp cloth.
  3. Lather the sponge and gently work over the entire surface. To clean dirty areas, you can use an old toothbrush for small areas or usual soft bristle brush. After the manipulation, be sure to wipe the Converse dry.
  4. Use a shoe dye product to get rid of stains and stuff. It should be applied to the leather Converse. Follow directions on inside / on the back of the product; usually, it is greater coverage and very easy to use. Don’t forget to wear gloves.
  5.  After cleaning, apply a shoe polish (colorless) and polish the entire surface.

How To Clean White Converse Without Baking Soda

What You Will Need

  1. Toothpaste
  2. Old toothbrush

How To Use It

  1. Apply the toothpaste on all the dirty spots of your shoes.
  2. Use a paste and not a gel, plus anything in white and not colored.
  3. Let it soak in for about 15 minutes.
  4. Rinse the shoes in cold water or put it in the washing machine.
  5. Hang them dry, and repeat the process if need be.